Loading... Please wait...
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6
Image 7
Image 8
Image 9
Image 10

Base Pad for CZ75

$35.99

Choose Your Options

SKU:
CZBP940-00
Quantity:

Always Enjoy Free Shipping On Orders Of $200

Product Description

CZ +2

Not for sale to California residents. A courtesy email will be sent to CA residents who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued. CA residence can only purchase +0 base pads and GLOCK 43 and GLOCK 42 base pads. The 43 and 42 base pads do not take the mag capacity past ten rounds.

When installing the TTI base pad:

*Remove the metal insert at the bottom before installation*
*Does not come with an allen key. Because the screws are set with Loc-tite to achieve a nice tension with the pin. If the pin is very loose use a 1/16 allen (hex) to tighten it.* 

TTI Firepower Base Pad for CZ75 17 round magazine:

- Patented proven push pin design.
- attach and detach with ease from the magazine.
- No specialty tools or devices required to assemble/disassemble.
- One piece design. No extra parts to possibly lose during disassembly.
- Fits the USPSA 140mm gauge.
- Holds 19+1 rounds of 9mm in the CZ75 17 round magazine.
- The added weight helps the magazine drop free easily for faster reloads.

- CNC machined from billet aluminum.
- Hard anodized coloring process.
- Made in the USA.

The Taran Tactical Innovations CZ base pad adds 2 extra rounds to the CZ75 17 round magazine, making the 17 round magazine capable of holding 19 rounds in the magazine and 1 in the chamber. The TTI CZ base pad, just like all of our base pads are designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning between stages. Just push the down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

 

CZ +4

Not for sale to California residents. A courtesy email will be sent to CA residents who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued. CA residence can only purchase the GLOCK +0 base pads, GLOCK 43 and GLOCK 42 base pads. The 43 and 42 base pads do not take the mag capacity past ten rounds.

When installing the TTI base pad;

*Remove the metal insert at the bottom before installation* 

TTI Firepower Base Pad for CZ75 17 round magazine

- Patented proven push pin design.
- Super easy to attach and detach from the magazine.
- No specialty tools or devices required to disassemble.
- One piece design, no extra parts to possibly lose during disassembly.
- Fits the USPSA 140mm gauge.
- Holds 21+1 rounds of 9mm in the CZ75 17 round magazine.
- The added weight helps the magazine drop free easily for faster reloads.
- CNC machined from billet aluminum.
- Hard anodized coloring process.
- Made in the USA.

The Taran Tactical Innovations CZ base pad adds 4 extra rounds to the CZ75 17 round magazine, making the 17 round magazine capable of holding 21 rounds in the magazine and 1 in the chamber. The TTI CZ base pad, just like all of our base pads are designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning between stages. Just push the down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

Product Reviews

Write Review

  1. Perfect fit

    Posted by Ernie on Feb 12th 2017

    After procrastinating for sometime due to non-existence of reviews when used on a CZ Customs magwell I finally took the plunge and boy it did fit! Just like any other TTI base pads I have used in the past, these pads for my CZ fits tight and secure. Highly recommended for ease of removal and cleaning. Thank you Taran and Landon

  2. Typical great Taran product... but....

    Posted by Marc on Feb 7th 2017

    The basepads are great, came fast, and were easy to install. I have Taran pads on my Glock and AR mags. These were purchased for my CZ75 and the new USPSA rule allowing 140mm full capacity magazines in the CO division. Now the BUT.. as mentioned in another review, be careful as they are ONLY legal in the 17 round or less magazines. I had a few 17s but most of my original factory mags (10) which came with my guns, are 18 round and the extensions will make your magazine length way too long and therefore illegal for USPSA or IPSC competitions. Also as a side note: if you take the +2 bases off the Mec Gar 17 round mags replace with the +4 Tarans, they fit the gauge, but do not move those +2 Mec pads to the CZ 18 round mags as this again will make them too long. In this case you can grind the corner off the +2 Mec base and make them fit the gauge.

  3. Best I have found!

    Posted by Barry Berger on Aug 30th 2016

    Bought the +2 for my CZ SP01 Target, and they not only look good, but they work flawlessly. Would recommend this product to anyone who is looking to increase the round count in the mag, but still stay within the 140mm limit for USPSA/IPSC

  4. Easy, Fast and Awesome!

    Posted by Travis on Jun 17th 2016

    I ordered the +4 base pads for my Shadow SP-01 18 round magazines. The base pads went on in a snap. With the base pad, and stock follower I was able to get 22 rounds in the magazine. With a little work in, I probably could get 23. They do however measure 146.65mm with the +4 so I had to swap them with the +2 extensions. I called in and the service team took care of me in a snap. They are really great folks to talk to, they are knowledgeable and willing to help!

    Hats off to the team at TTI!

  5. BETTER THAN THE CZ CUSTOM

    Posted by jim dillon on Jun 3rd 2016

    Cheaper and easier to set up than the cz custom shop extension

  6. Very impressed!

    Posted by Samuel on May 17th 2016

    This mag extension is very well built. I purchased 4 of these and put it on 16 round OEM magazines. I'm sure I would have more clearance with 17 round mags but this will work just fine. Currently I have only been able to add 4 rounds per magazine but I'll soon get the last one in there.

  7. Work Great!

    Posted by Anthony on Apr 8th 2016

    Bought these for the 16 round magazines (before they changed it to 17 and 18 only) and they work great. I've only put a few hundred rounds through the mags (Mec Gar and factory) with these installed but I haven't had one problem with them and the slide has always locked back on the last round, I am using the standard magazine spring as well. I just had to round the bottom edge of the follow a tad bit with some sandpaper because it was getting hung up on the base pad while trying to get the last round in but this could be strictly related to my magazines. I will definitely be buying more of these.

Find Similar Products by Category