Loading... Please wait...
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6
Image 7
Image 8
Image 9
Image 10
Image 11
Image 12
Image 13

Base Pad Kit for M&P

$42.99
SKU:
MPB940
Quantity:

Always Enjoy Free Shipping On Orders Of $200

Product Description

The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw.

Not for sale to California residents. A courtesy email will be sent to CA residence who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued. CA residence can only purchase +0 base pads or GLOCK 43 and GLOCK 42 base pads. The 43 and 42 base pads do not take the mag capacity past ten rounds.

**Does not work on the compacts**

*Remove the metal insert at the bottom before installation*

 Base pad for M&P +1/4

TTI M&P Firepower Base Pad Kit.

 

- Designed to work with the stock magazine spring

- Length, 1 1/2 inch front side, 1 inch on back side.

- Patented, proven push-pin design.

- Easily attaches and detaches from the magazine.

- No specialty tools or devices required to disassemble.

- One piece design, no extra parts to possibly lose during disassembly.

- Fits the USPSA 140mm gauge

- Holds 16+1 rounds of .40 S&W.

- Holds 22+1 rounds of 9mm.

- The added weight helps the magazine drop free easier for faster reloads.

- CNC machined from billet aluminum.

- Hard anodized.

- Made in the USA.

- Used and endorsed by multi-time World and National Champions Jerry Miculek, Team Miculek, and Julie Golob.

 

This Taran Tactical Innovations M&P base pad works on any full sized M&P handgun. This base pad will add 4 extra rounds in 9mm and 1 extra rounds in .40 Caliber to the magazine. This TTI base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI M&P base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

 

Base pad for M&P +5/6

Not for sale to California residents. A courtesy email will be sent to CA residence who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued. CA residence can only purchase +0 base pads or GLOCK 43 and GLOCK 42 base pads. The 43 and 42 base pads do not take the mag capacity past ten rounds.

**Does not work on the compacts**

*Remove the metal insert at the bottom before installation*

 

TTI M&P Firepower Base Pad Kit.

- 10% stronger spring included.

- Overall weight 1.2oz.

- Length, 1 1/2 inch front side, 1 inch on back side.

- Patented, proven push-pin design.

- Easily attaches and detaches from the magazine.

- No specialty tools or devices required to disassemble.

- One piece design, no extra parts to possibly lose during disassembly.

- Fits the USPSA 140mm gauge

- Holds 20+1 rounds of .40 S&W.

- Holds 23+1 rounds of 9mm.

- The added weight helps the magazine drop free easier for faster reloads.

- CNC machined from billet aluminum.

- Hard Anodized.

- Made in the USA.

- Used and endorsed by multi-time World and National Champions Jerry Miculek, Team Miculek, and Julie Golob.

 

This Taran Tactical Innovations M&P base pad works on any full sized M&P handgun. This TTI base pad will add 6 extra rounds in 9mm and 5 extra rounds in .40 Caliber to the magazine. This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This M&P base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

 

Product Reviews

Write Review

Showing reviews 1-10 of 105 | Next

  1. Set screw needs to be fixed

    Posted by justinlsaunders@gmail.com on Jun 18th 2018

    The mag extension does its job it’s fine. But the set screw to secure it to the mag is poor at best. I realize it’s small and needs to be kept small. But it strips so easily.

    TTI Rep: The screw is set with lock-tite and will strip if one tries to tighten it. Per our product description, our basepads are a tool-less design (except for the Shield basepads.), all that you have to do is put the basepad on and push the pin up and you are ready to go. LT.

  2. Best mag update

    Posted by Brandon Groomer on May 21st 2018

    Works perfectly and runs great. A little stiff loading the fist 20 rounds but after I did it is easier to load by hand.

  3. +1/4 base pad Great Product

    Posted by Unknown on Apr 30th 2018

    I purchased 3 of these for my S&W M&P CORE pistol for 3 gun. I installed them on my magazines which was fairly simple. I can now load 22 bullets in my magazines. Best thing ever.

  4. +3 and +6 Extensions for M&P 2.0s

    Posted by Tyler on Apr 30th 2018

    I got one of each of these extensions for my 9mm M&P 2.0s - full size and Compact.

    The +6s work great, no issues at all and all the things they say they should do, the provide. You get what they advertise.

    I tried the +3 on my M&P 2.0 Compact. They fit the mags well, and after removing some material from the lanyard attachment/grip plug/takedown tool, it worked like a charm.

    The angles on the back of the extension baseplates were different from the factory baseplates so some modification was required to get them to seat well. They would go in alright if I really drove them in, but they would not drop free when I pushed the mag release. Again, little bit of filing (went very slow so o removed just what I needed to remove to make it work so it took a while) and the +3 works in the 2.0 Compact.

  5. +6 Base Pad for M&P 2.0

    Posted by El Guapo on Apr 16th 2018

    Excellent product, fit and finish was dead on. Easy to install, fast processing, and shipping. Will definitely be ordering more.

  6. Very nice

    Posted by James on Apr 6th 2018

    Very nice products I will definitely be doing business here again

  7. Easy I install

    Posted by Matt on Apr 2nd 2018

    I found the base pad was simple to install on factory magazines. However they do not appear to work well on promag after market magazines.

  8. +5/6 is a sweet product, looks and functionality

    Posted by Unknown on Mar 19th 2018

    This is an excellent product and will be buying more in the future. Only one thing is that I wish it was a slighty tighter fit, the jaws that slide on the mag have a bit more play than my liking.

  9. High quality

    Posted by Brandon on Mar 12th 2018

    These are really high quality. I got 3 and they all fit 23 rounds, heck yeah! Shot about 400 rounds with them, no issues. I haven't started dropping them on the floor yet, but I think they'll hold up just fine.

  10. Great item!

    Posted by Unknown on Mar 11th 2018

    Great product! Just a bit too pricey. It's just a small piece of aluminum, easy to make, no difficult machining cuts, literally no need to be over $40. I bought full size M&P kit for my compact because the only option was full size or shield. Either way, it fits phenomenally, feels amazing and provides enough purchase for my grip, and looks slick. I used the factory springs and got +5 with no issues. The springs sent with the kit are for extending a full size mag, so slightly too large. After 300rds through them and no feeding issues (or issues of any kind), I'm confident in this product!

Showing reviews 1-10 of 105 | Next

Find Similar Products by Category