Categories

 Loading... Please wait...

Categories

Always Enjoy

Free Shipping

On Orders Of $200
+3/4 Blue
+3/4 Red
+3/4 Flat Black
+3/4 Titanium Gray
+3/4 Black
+3/4 Titanium Blue
+5/6 Titanium Gray
+3/4 Titanium Purple
+5/6 Black
Glock 9/40 Full Size Base Pad
+5/6 Red
+5/6 Titanium Purple
+5/6 Blue
+5/6 Titanium Blue
+3/4 Coyote Bronze
+3/4 OD Green
+5/6 OD Green

Base Pad For Glock 9/40 Full Size Magazines

$41.99
SKU:
GBP940
Quantity:

Always Enjoy Free Shipping On Orders Of $200

Product Description

The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw.

*Both extensions will be compatible with Glock 45 9mm firearms as well as Glock 19X firearms. Product has only been tested out with Glock OEM magazines*

To view our +0 Base Pads, please follow this linkhttps://tarantacticalinnovations.com/0-base-pad-for-glock-oem-magazines/

GLOCK 9/40 +3/4

Not for sale to California residents. A courtesy email will be sent to CA residence who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued. CA residence can only purchase +0 base pads or GLOCK 43 and GLOCK 42 base pads. The 43 and 42 base pads do not take the mag capacity past ten rounds.

**Will not work on GLOCK 19 magazines**

*Remove the OEM polymer insert at the bottom before installation*

*Will not function with early generation Glock mags that have u-notch cut feed lips* 

*WILL NOT WORK WITH 10 ROUND MAGAZINES!*

TTI Firepower Base Pad Kit for GLOCK.

- Designed to work with stock magazine spring.

- Will work on all full size double stacked GLOCKs.

- Overall weight 0.8oz.

- Length, 1/2 inch.

- Patented proven push pin design.

- Super easy to attach and detach from the magazine.

- No specialty tools or devices required to disassemble.

- One piece design, no extra parts to possibly lose during disassembly.

- Fits the USPSA 140mm gauge.

- Works only on high-cap double stacked GLOCK OEM magazines.

- Holds 18+1 rounds of 40S&W.

- Holds 21+1 rounds of 9mm.

- The added weight helps the magazine drop free easily for faster reloads.

- CNC machined from billet aluminum.

- Hard Anodized.

- Made in the USA.

- Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler.

*The Taran Tactical Innovations GLOCK +3/4 base pad works on GLOCK models 17/17L/19X/22/24/34/35/45 9mm.* This base pad will add 4 extra rounds in 9mm and 3 extra rounds in 40 Caliber to the magazine. This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

 

GLOCK 9/40 +5/6

Not for sale to California residents. A courtesy email will be sent to CA residence who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued. CA residence can only purchase +0 base pads or GLOCK 43 and GLOCK 42 base pads. The 43 and 42 base pads do not take the mag capacity past ten rounds.

**Will not work on GLOCK 19 magazines**

*Remove the metal insert at the bottom before installation* 

*Will not function with early generation Glock mags that have u-notch cut feed lips* 

*WILL NOT WORK WITH 10 ROUND MAGAZINES!*

TTI Firepower Base Pad Kit for GLOCK.

- The +5/6 Base Pad includes a +10% stronger spring with purchase.

- Overall weight 1.6oz.

- Length, 1 1/2 inch front side, 3/4 inch on back side.

- Will work on all full size double stacked GLOCKs.

- Patented proven push pin design.

- Super easy to attach and detach from the magazine.

- No specialty tools or devices required to disassemble.

- One piece design, no extra parts to possibly lose during disassembly.

- Fits the USPSA 140mm gauge.

- Ideal for full size magazines.

- Holds 20+1 rounds of 40S&W.

- Holds 23+1 rounds of 9mm.

- The added weight helps the magazine drop free easily for faster reloads.

- CNC machined from billet aluminum.

- Hard Anodized.

- Made in the USA.

- Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler.

*The Taran Tactical Innovations GLOCK +5/6 base pad works on GLOCK models 17/17L/19X/22/24/34/35/45 9mm.* This base pad will add 6 extra rounds in 9mm and 5 extra rounds in 40 Caliber to the magazine. This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

 

Product Reviews

Write Review

Showing reviews 1-10 of 282 | Next

  1. great product

    Posted by JASON on Aug 20th 2019

    order came quickly and the install was a breeze. Now I going to get them for my AR15 PMAGS.

  2. Awesome quality

    Posted by zachstrong25@yahoo.com on Aug 12th 2019

    Took a while to ship out, but definitely worth the wait. Love it !

  3. Outstanding!

    Posted by James Gambill on Jul 25th 2019

    Ready to up my game at our next local Steel Challenge!

  4. Excellent upgrade

    Posted by Eric on Jul 15th 2019

    I'd heard nothing but good things about these extensions so I watched some youtube videos and got the same info. I bought some and I have to say it was a great investment. I highly recommend these, whether or not you have any type of magwell flare.

  5. Great Product

    Posted by Jason M Ward on Jul 15th 2019

    3/4 round base extensions utilize the OEM spring assembly. Difficult to get off the base pad on new magazines. My only complaint is they do not include a hex/torx tool to tighten it down.

    TTI Rep: Do not tighten the set screw. It is pre-set to the proper tension. The screw has lock tite on it and will result in stripping the screw. Thus voiding your warranty.

  6. Great Product

    Posted by Jason M Ward on Jul 15th 2019

    3/4 round base extensions utilize the OEM spring assembly. Difficult to get off the base pad on new magazines. My only complaint is they do not include a hex/torx tool to tighten it down.

    TTI Rep: Do not tighten the set screw. It is pre-set to the proper tension. The screw has lock tite on it and will result in stripping the screw. Thus voiding your warranty.

  7. Love this base pad

    Posted by Christian on Jul 11th 2019

    Running these for 3 of my glocks. They work great and are easy to install. I work at a gun store and see many types of competing pads. Taran is my go to.

  8. Looks great!!!!!

    Posted by Timmy on Jul 8th 2019

    I bought the +5 for my G19 gen 5. Who doesn’t like the piece of mind knowing there’s 5 more shots in their mags. Product is is well built and finish is flawless. It’s fits on the oem mag like is was suppose to be there from the factory
    Installation was super easy and fast. Takes about a minute to install.
    This product came highly recommended and I woyld say the say thing. Looking forward to purchasing more in the future.

  9. Works good, but tough to install.

    Posted by NS on Jul 3rd 2019

    I will start by saying they work great and they look awesome. They have a lot of usefulness and I highly recommend them.

    They are tough to install. Although it really only takes a bit of common sense, no directions are included to guide you through installing them. It is tough to get the new springs to stay on the follower. And it's super tough to get the spring depressed and get the actual baseplate out on. Furthermore, these have chewed up my magazines. I don't anticipate taking these off again, but it's not something you can put on and off repeatedly before it will completely destroy the base of the polymer magazine.

  10. Great base plate issue in installing

    Posted by Don Rogers on Jul 2nd 2019

    The product is good its a little hard to get the plate to line up on your mag with the spring. I would suggest to line it up once without the spring out before trying with the spring it seemed to work better on the other one I bought.

Showing reviews 1-10 of 282 | Next

Find Similar Products by Category