Loading... Please wait...
Image 1
Image 2
Image 3
Image 4
Image 5
Image 6

Base Pad Kit for PPQ

$42.99
SKU:
PPQBP
Quantity:

Always Enjoy Free Shipping On Orders Of $200

Product Description

The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw.

Base pad PPQ +3

Not for sale to California residents. A courtesy email will be sent to CA residence who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued. CA residence can only purchase +0 base pads or GLOCK 43 and GLOCK 42 base pads. The 43 and 42 base pads do not take the mag capacity past ten rounds.

*Remove the metal insert at the bottom before installation*

TTI Firepower Base Pad Kit for Walther PPQ,

- Patented proven push pin design.
- Easily attaches and detaches from the magazine.
- No specialty tools or devices required to disassemble.
- One piece design, no extra parts to possibly lose during disassembly.
- Fits the USPSA 140mm gauge.
- Ideal for full size magazines.
- Holds 14+1 rounds of 40S&W.
- Holds 19+1 rounds of 9mm.
- The added weight helps the magazine drop free easier for faster reloads.

- CNC machined from billet aluminum.
- Hard anodized.
- Made in the USA

This Taran Tactical Innovations PPQ base pad works on any full sized PPQ magazine. This TTI base pad will add 3 extra rounds to the magazine. This TTI base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI PPQ base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

 

Base pad PPQ +5

Not for sale to California residents. A courtesy email will be sent to CA residence who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued. CA residence can only purchase +0 base pads or GLOCK 43 and GLOCK 42 base pads. The 43 and 42 base pads do not take the mag capacity past ten rounds.

*Remove the metal insert at the bottom before installation*

Spring Included

- 10% stronger spring Included.
- Patented proven push pin design.
- Easily attaches and detaches from the magazine.
- No specialty tools or devices required to disassemble.
- One piece design, no extra parts to possibly lose during disassembly.
- Fits the USPSA 140mm gauge.
- Ideal for full size magazines.
- Holds 16+1 rounds of 40S&W.
- Holds 21+1 rounds of 9mm.
- The added weight helps the magazine drop free easier for faster reloads.

- CNC machined from billet aluminum.
- Hard Anodized.
- Made in the USA.

This Taran Tactical Innovations PPQ base pad works on any full sized PPQ magazine. This TTI base pad will add 5 extra rounds to the magazine. This TTI base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI PPQ base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

Product Reviews

Write Review

Showing reviews 1-10 of 31 | Next

  1. GLOCK 19 Base Pad / Walther PPQ M2 9mm

    Posted by James on Jan 15th 2018

    These base pads are awesome, work great with my glock 19 & and my walther ppq will be purchasing more.

  2. Top quality

    Posted by Rob on Jan 13th 2018

    Amazing product from a even more amazing company.plates were easy to instal and look great .I will be ordering more from this company in the future

  3. Great product, finish has some marks.

    Posted by OddlyEnuff on Dec 26th 2017

    +5 baseplate received, installation was straight forward. Works pretty well. There is some confusion in the product description, the description says "21+1". If it's a +5 then it should read "20+1", the factory mag is 15 rounds. I read others say there is a gap between the base plate and the grip and there is. The mounting lips on the TTI baseplate are shorter than the factory baseplate so more of the magazine is revealed, hence the "bigger" gap. If the TTI baseplates had an extra 1/16" on top, the gap would be minimized. Finally, and what dropped my rating to 4 stars, the titanium gray finish almost matches my factory titanium PPQ but the finish had some dark lines going around the baseplate, looks like marks made from an assembly line while the coat was not completely cured. For a $45 piece I would expect the coating to be perfect. I would return but I like the product enough to deal with it. I would be happy to send pics upon TTI's request.

  4. Great base pads

    Posted by GunSmoke on Dec 23rd 2017

    Seem to be high quality material and very well made. Extremely easy to install. Only time will tell if they hold up to the abuse they’ll be getting. I’m betting on they will. As other reviewer have already mentioned, the last round is very hard to get in. But that’s not a problem anyway cause I always load one less round in any magazine. This will help in seating the magazine in the firearm on the run. Very annoying if not embarrassing to have your magazine fall out after the first shot because you failed to properly seat your magazine.

  5. Can't be beat

    Posted by Unknown on Dec 4th 2017

    Nicest basepads on the market. Add functionality and style. Will continue to buy them for every magazine I own.

  6. Great product

    Posted by Jeff on Nov 30th 2017

    Great looking base plate just wish it fit my mag this dose not work for the ppq 45.

  7. Outstanding

    Posted by Mark on Nov 6th 2017

    Just bought 3 of these for my Q5. Fit and finish was perfect and easy install. I've only been able to get +5 in but after reading some comments, I'll try again.

    Now Taran, when will you make the mag-well for the PPQ/Q5??

  8. Excellent mag upgrade

    Posted by Justin on Oct 26th 2017

    I bought two of the +5 mag extensions for my Q5 match and they fit perfectly. Operation is normal and I'm quite satisfied. Installation was fairly easy.. only shot a spring across the room once! 21 rounds of 9mm easily fit and the blue color almost perfectly matches Walther's trigger color. If you need a few extra rounds to compete or just hate reloading, you need these.

  9. Great product!

    Posted by Unknown on Oct 24th 2017

    Product was shipped quickly to me (Texas) - had it within a few days. Base pads were easy to install and increased capacity of my Walther PPQ Q5 Match stock mags to 21 rounds! - The included spring is longer and stiffer than the original so getting that 21st round in requires a little extra force but it will fit. A magazine loader/ speed loader easily allows you to get that last round in.

  10. Great Product

    Posted by Steve on Oct 4th 2017

    I ordered two of these for the Walther PPQ. One of them has been flawless. The other has had issues. The screw to keep the base plate in place doesn't hold tight. I thought I had stripped it, but it has all of the threading still and just appears to not function properly. If both functioned as well as the first one I bought, I would order more. Testing it against others from Freelance now.

    TTI Rep; Our basepad is a tool-less design. There is no need to tighten the screw. We set the screw with lock tite and will result in stripping the screw. Just push the pin down, slide the basepad on, and push the pin up. Thats it. LT

Showing reviews 1-10 of 31 | Next

Find Similar Products by Category