Silicon Carbide extra power spring for MPX with +10 basepad.
The extra power spring is designed to enhance feeding and to ensure the bolt locks back when empty.
Please check your local and state laws before purchasing. If your order needs to be refunded due to compliance issues, you will be subject to all applicable fees. Please see our Returns/Cancellations Terms for more information.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
I use these with Taylor Freelance +10 magazine extensions. I have them on two mags and both feed flawlessly. Both mags lock the bolt back when empty and after the last round. I have about 250 rounds and one range trip on them so far. I am very pleased with these springs as the factory springs are shorter and mine wouldn't hold the bolt open.
Springs approximately 1.5" longer than OEM. I guess this is because of the 10 round mag extensions shooters commonly add. Wire gage same diameter (.054") as OEM. Used in practice and PCC match this past weekend - about 200 rounds. Performed perfectly. Original OEM springs had failed to hold bolt open after a year.
I bought three basepads (TTI) and they didn't come with the Power Spring (I purchased thru another vendor). The bolt wouldn't lock back. So a buddy told me I needed these, man. I'm glad I got them. Bolt locks back, good pressure when you load the magazines, and also no feeding issues. Thanks.
