Worked great!
Love the baseplates. I am able to squeeze in 2 extra rounds and didnt see any reliability issues.
* ALL SALES ARE FINAL WITH BLEM-VENTORY MAGWELLS *
* EVERY blemished base pad will have a small lightning bolt lasered on it to indicate that it is from BLEM-VENTORY. *
*Please contact us for any questions about the aesthetic condition, or leave an order comment with your preference. We will do our best to accommodate any requests*
The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw.
Using the table below, you will be able to identify what parts you will need for your given pistol depending on what division you want to shoot.
To use this Table: First, look for what division in which you want to shoot. Second, find the the Tube Length. Third, locate what caliber are you shooting. Once you have found all of identified what parts you are using, you will then be able to see which basepad, spring and follower you will need. You will also be able to tell what capacity you achieve with the given configuration.
Base Pad SV/STI 3mm
*Not for sale to California and Washington residents. A courtesy email will be sent to CA/WA residents who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued unless the purchaser is active Law Enforcement. CA/WA civilians can only purchase base pads listed on the following link - https://tarantacticalinnovations.com/magazine-extensions/california-compliant/
*Remove the metal insert at the bottom before installation*
The TTI Base Pad for STI, SV, SPS, & Rescomp Magazine Tubes Use the TTI Base Pad with the TTI spring and TTI Follower for maximum capacity.
3mm for SV/SPS/Rescomp 140/170mm magazines.
Base Pad SV/STI 4mm
*Not for sale to California and Washington residents. A courtesy email will be sent to CA/WA residents who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued unless the purchaser is active Law Enforcement. CA/WA civilians can only purchase base pads listed on the following link - https://tarantacticalinnovations.com/magazine-extensions/california-compliant/
*Remove the metal insert at the bottom before installation*
The TTI Base Pad for STI, SV, SPS, & Rescomp Magazine Tubes Use the TTI Base Pad with the TTI spring and TTI Follower for maximum capacity.
*4mm (4 the Gauge) is recommended for anyone doing mag tuning who has a USPSA mag gauge.
4mm for STI/SPS/Rescomp 140/170mm tubes.
4G2 for all SV 140mm 40S&W old and new style tubes.
Base Pad SV/STI 7mm
*Not for sale to California and Washington residents. A courtesy email will be sent to CA/WA residents who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued unless the purchaser is active Law Enforcement. CA/WA civilians can only purchase base pads listed on the following link - https://tarantacticalinnovations.com/magazine-extensions/california-compliant/
*Remove the metal insert at the bottom before installation*
The TTI Base Pad for STI, SV, SPS, & Rescomp Magazine Tubes Use the TTI Base Pad with the TTI spring and TTI Follower for maximum capacity.
7mm for 140mm Open mags and 126mm Open or Limited mags, or older under length Infinity Big Sticks.
*This is preferred base pad for non-big stick tubes in Open division to get 23-24rds without extending the mag too long where it’s tricky to do fast reloads.
7mm for SPS 134/164mm 38/9mm and 40S&W.
*Due to the variances in mag tube dimensions from different companies and even different generations of mags from the same company, the base pad may require minor fitting to the tube and the back of the lips may need the sharp edges buffed down so the mag will fit the gauge.*
Love the baseplates. I am able to squeeze in 2 extra rounds and didnt see any reliability issues.
They may say “blemished” but I haven’t seen a flaw… and it’s a tool… use them like they are intended and they gonna get those “blemishes”… definitely be buying more asap!!!! Thanks for providing a Hell of a product!
Great deal. Blem was hardly noticeable. Works like new. Will order more soon.
