Crisp break and short reset
Crisp break and short reset. Consistent 3.25 trigger weight. By far the best Glock trigger set up I have used.
*Stainless steel trigger pin does not serve any functional purpose, but is simply an identifier that our components are in your trigger.*
*Carry Version does NOT include a striker spring, the Competition Version will include a striker spring*
*Taran Tactical recommends that you go to a certified gunsmith or Glock armorer for installation*
TTI Ultimate Connector Kit Any great shooter who knows their way around a Glock will tell you that the key to having the optimal set-up is a great connector kit and extra springs.
For all Glock models aside from Glock 42 and Glock 43 firearms.
Glock's advertised 5.5lb trigger pull actually measures out at 7-7.75lbs on average.
The Ultimate Connector Kit brings down the trigger pull to 3-5lb with no gunsmithing! (Varies from Glock to Glock).
This trigger package will provide the lightest, smoothest, and cleanest trigger break you'll ever put into your Glock.
Made from extremely hard SAE 1075 Heat-Treated Tool-Steel, highly polished, and the only connector that is electroless nickel plated ( MIL-C-26074E Military Standard ).
This process achieves a light, clean smooth break with specially designed chrome silicone springs to remove some of the take-up and add a faster reset while reducing brittleness.
Top shooters from around the world attest to the superiority and competitive excellence brought by the Ultimate connector kit.
Shooters such as; Nils Jonasson( National Champion ), Shane Coley ( National Champion ), Blake Miguez ( National and World Champion ), Shannon Smith ( National Champion ), Manny Bragg, Dustin Ellerman ( Top Shot Winner ), Randi Rogers( National and World Champion ), Kieth Garcia( 3 Gun Nation Champion), Gabby Franco ( Top Shot ), and Allie Barrett ( World Rim-Fire Champion ).
Kit includes:
DSCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols
Please check your local and state laws before purchasing. If your order needs to be refunded due to compliance issues, you will be subject to all applicable fees. Please see our Returns/Cancellations Terms for more information.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Crisp break and short reset. Consistent 3.25 trigger weight. By far the best Glock trigger set up I have used.
I purchased 2 of these kits at one time and installed them on a modified G19 and a almost stock G17, both have polished trigger assemblies. The G19 has a apex flat faced trigger,plunger safety and a 3.5lb ghost disconnect, the geometry of the apex kit gave the trigger pull a very crisp break that felt a little stiff at first. After installing the Taran spring kit the trigger break still has the crispness of a solid wall after the pre-travel is taken up. The trigger pull is much lighter and smother, as remarked by all the glock guys in my group! The other kit went on my loaned out G17, the trigger polish gym I did helped but you can only do so much with a factory glock trigger! Again the trigger pull weight was noticeably reduced along with a "smoothing out" of the trigger break. Both guns felt as if the trigger reset was a little less "positive" in feel and sound but by just a little. This is by no means a negative for me as I'm sure it will become normal with training. To be honest I was a little surprised at the reliability of the kit, I took all my factory parts to the range with me just in case I started misfiring or having other malfunctions. I only had one round not fire but when I looked at it off the line I noticed that it was a round I had picked up off the loading bench thinking someone dropped it, so I'm not going to blame this kit at all for this, it was just me being cheap! All together I am very pleased with my purchase and will be recommending this kit as a very affordable upgrade to a stock Glock!
I ordered this kit for my Gen4 34 for 3 gun and uspsa, this was my first time working on internals of a glock, the installation was going real smooth, no problems with the striker or plungers, the connector and trigger return spring seems okay to install. So I put the gun back together and I could continually pull the trigger so I try to take the gun apart and it won't release. I take the striker out and I'm able to let the slide off. So I take it to a local shop with a smith and have him work on it. Turns out the trigger return spring was too large and causing the problems, he put a standard one in and problem solved. The trigger pull however does feel much improved and is smoother than the stock pull. I don't know whether I got the wrong spring in my kit or my spring was out of spec. I really hope my case was an anomaly because i have really high hopes for this kit and the rest of the TTI products. TTI Representative: This is a fitment issue related to the connector and trigger bar set up in certain Glock firearms. A properly tensioned connector will allow our trigger return spring to operate correctly. Please call the shop for further assistance. 805.522.1911
