TTI Ultimate Fiber Optic Sights Set for Glock with Optic Cut

Please Note: Fiber Optic does NOT come installed on the front sight

Replacement Fiber Optic - https://tarantacticalinnovations.com/replacement-fiber-optic-rod/

• Made for double stack Glocks.
• 1/16 allen key.
• Made to be co-compatible with optic cut slides in order to prevent removing iron sights with optic use. Take your pick between our standard height and our co-witness height!
• RMR Co-Witness option is for Glock slides that have gotten the RMR cut, like the one we provide. This is not for MOS Glock slides.
• POA/POI set at 15 yards for Full Sized Glocks using 124 grain ammo. If you put the sights on another Glock (Sub compact/compact) the POA/POI will change since the sight ratio has changed. Figure out what your given POA/POI is for other Glock models and remember it. Take into account what type ammo you are using, different grain and bullet weight can change the bullets flight path.
• The TTI Ultimate Fiber Optic Sights for GLOCK were designed to the specifications of Taran Butler for optimum sight picture and the brightest fiber optic front sight possible.
• The fiber optic dot has been moved up to the very top of the front sight so that the shooter will not get confused with shooting off the top of the dot or a big/thick blade sitting above it - Which can cause the shooter to shoot either too high or too low.
• The fiber optic bar is NOT partially embedded into the floor of the sight. That means that more light reaches a greater portion of the circumference of the rod.
• Our shiny, stainless steel screw, reflects even more light right to the middle of the rod.
• As an added bonus, the front sight is designed to also be compatible with the GLOCK factory screw in case it is dropped or lost at the time of installation.
• The front of the rear sight is angled to allow one-handed charging from your belt, pants, or any other object.
• All new punch inlay design on both sides of rear sight for better ease of installation and adjustment.

Standard Height Specs (Non Co-Witness)

• The front sight is .210" tall and .124" wide for perfect point-of-impact with the GLOCK 17, 17L, 19, 20, 21, 22, 23, 24, 34, and 35.
• The rear is .240" tall. The tighter .125" rear notch helps dramatically when shooting small steel and tight shots at a distance.

RMR Co-Witness Height Specs (1/3rd Co-Witness)

• The front sight is .315" tall and .124" wide for perfect point-of-impact with the GLOCK 17, 17L, 19, 20, 21, 22, 23, 24, 34, and 35.
• The rear is .317" tall. The tighter .125" rear notch helps dramatically when shooting small steel and tight shots at a distance.

MOS Co-Witness Height Specs (Absolute Co-Witness)

• The front sight is .365" tall and .124" wide for perfect point-of-impact with the GLOCK 17, 17L, 19, 20, 21, 22, 23, 24, 34, and 35.
• The rear is .375" tall. The tighter .125" rear notch helps dramatically when shooting small steel and tight shots at a distance.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols

Please check your local and state laws before purchasing. If your order needs to be refunded due to compliance issues, you will be subject to all applicable fees.  Please see our Returns/Cancellations Terms for more information. 

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov