Very nice
Great quality, perfect size. Other oversize knobs I looked at on the market were just too big for my preference. This one is perfect, works great. The screw included is 5-40 size. You'll need a 5-40 tap and a #38 drill bit.
*Drilling and tapping required (5/40 tap, #38 drill).
Will work on Benelli Shotguns & other shotguns with similar bolt release configuration.
Made of aircraft grade aluminum with mil spec hard anodizing.
Designed to be big enough to easily & quickly release the bolt in the heat of competition but not be too big to get caught on things on a defensive tactical shotgun.
Extensive testing of prototypes as well as previously existing bolt releases has proven this design to be perfect in size and dimension.
You never want to run your shotgun dry during a match but, if you do, this part can help you get back into action as fast as possible.
The TTI Oversized Bolt Release has already proven itself by winning all major divisions at the 3-Gun Nationals in 2013 as well as the 3-Gun Nation Championship.
Used and trusted by the best 3-Gunners on Earth:
Keith Garcia, Nils Jonasson, Jesse Duff, Katie Harris, Clint Upchurch, Rob Romero, Jansen Jones, Randi Rogers, Kurt Miller, Todd Jarrett, Chuck Anderson, Burton Thompson, Allie Barrett, Blake Miguez, and the Taran Butler, himself.
Please check your local and state laws before purchasing. If your order needs to be refunded due to compliance issues, you will be subject to all applicable fees. Please see our Returns/Cancellations Terms for more information.
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Great quality, perfect size. Other oversize knobs I looked at on the market were just too big for my preference. This one is perfect, works great. The screw included is 5-40 size. You'll need a 5-40 tap and a #38 drill bit.
I installed this onto an FNH competition shotgun. Yes, you are required to drill and tap your original release button, which can be a bit unsettling at first, but once you get it all apart you'll find it to be quite easy. MUCH easier than opening a loading port. Once installed, your hand finds it very easily under pressure, the extra leverage means less effort, becomes very natural. If your factory button is domed, this probably won't work, if it's flat, will work on just about any shotgun. Great idea!
I didn't read that drilling and tapping were required for installation of this. i'm not a gunsmith, so had the extra cost for that. (I think it should come with a replacement pre drilled and tapped button). Otherwise, it makes it much easier to close the bolt in a hurry without having to physically look for that damn little button.
