On Orders Of $200
Shotgun Oversize Bolt Release
*Drilling and tapping required (5/40 tap, #38 drill).
Will work on Benelli Shotguns & other shotguns with similar bolt release configuration.
Made of aircraft grade aluminum with mil spec hard anodizing.
Designed to be big enough to easily & quickly release the bolt in the heat of competition but not be too big to get caught on things on a defensive tactical shotgun.
Extensive testing of prototypes as well as previously existing bolt releases has proven this design to be perfect in size and dimension.
You never want to run your shotgun dry during a match but, if you do, this part can help you get back into action as fast as possible.
The TTI Oversized Bolt Release has already proven itself by winning all major divisions at the 3-Gun Nationals in 2013 as well as the 3-Gun Nation Championship.
Used and trusted by the best 3-Gunners on Earth:
Keith Garcia, Nils Jonasson, Jesse Duff, Katie Harris, Clint Upchurch, Rob Romero, Jansen Jones, Randi Rogers, Kurt Miller, Todd Jarrett, Chuck Anderson, Burton Thompson, Allie Barrett, Blake Miguez, and the Taran Butler, himself.
Showing reviews 1-10 of 15 | Next
Posted by firstname.lastname@example.org on Aug 30th 2018
I couldn’t push the bolt realease with my left hand and only one finger. Can do it easily with the extend bolt release.
a nice up grade, But tricky to instal
Posted by mark on Apr 29th 2018
This is a very nice up grade to have. The only negative is on benelli. and their bolt release. Use a lot of caution when drilling and tapping for the the screw that holds on the extension. the button that you drill into is only secured by pressure and will easily spin off while drilling into it.
Posted by Jesse Hilger on Apr 6th 2018
No more searching for the small button and seems to give a little more leverage so don't have to push as hard to release. Little struggle finding the 540 tap. Not common size
No scrambling required!
Posted by Mike on Apr 2nd 2018
This is an essential add on to any Benelli! I just installed it on my 5th gun...and will continue to install on every gun I own. It makes closing the bolt a no-look, no-fumbling motion and provides tactile feedback every time. I even use this on my hunting guns, as it makes the bolt release operation so much easier while wearing thick gloves or with cold fingers. Make sure to get one, you won't be disappointed!
A Must Have!!!
Posted by Jon on Mar 8th 2018
Works very well when you need to find the release in a hurry. Gives the M2 a decent look as well.
Posted by Robert R Nunn on Mar 5th 2018
Love the look it gives my M4 and definitely makes the bolt release easier to operate
Creates a lot of real estate
Posted by email@example.com on Jan 22nd 2018
I love TTI products. I have the oversized safety, ultimate charging handle and multiple base pads. This is in the same catagory of quality. Love it and it works just as expected. The only reason I give four stars is for instructions. Had to really go looking to find the tap was 5-40. I installed this on a Benelli M2 and don’t know if this matters to folks but noticed that the button was not a solid machined piece but pressed into the arm of the release. Over time this may decide to rotate and if that happens... the shape of this button may be problematic as it rotates with the button. Just a thought and I could be totally off base... anyway... great product for the price.
Posted by Unknown on Dec 19th 2017
These will be on every one of my benellis. They are the right size to be functional and not too large that they hang on everything. They look good as well. I don't compete but hunt just about everything that flies and this is the best $25 you can spend on yr gun.
Simple & Effective Upgrade
Posted by Ross on May 9th 2017
This is right in line with the quality of Taran products and is a very simple yet effective add on. I drilled, tapped and re-blued the OEM button while I had it out for polishing and just bolted it on when I received it. I put some blue thread locker on and tightened it down and it's not going anywhere. Much easier now just to slap this release instead pressing the little button.
Make this your first add-on!
Posted by John P. on Apr 28th 2017
The bolt release button, as stock, is way too hard to press in a timely fashion and without moving my hands and/or the gun into an extreme position. This extension cures that problem! Now I can use my support hand under the action or over the action to send the bolt home and get back to running the course. Install requires a drill press, a bit I did not have and tap I did not have. My only suggestion for improvement would be to have Taran Tactical offer a "kit" that contains the oversized button, drill, and tap. But really, that's on the customer to read the description.
Showing reviews 1-10 of 15 | Next