close
close

Blem-Ventory Base Pad For Glock 19/23 OEM 9/40 Magazines

21 reviews Write a Review
$24.99 - $32.99
SKU:
B-GBP940C

Blem-Ventory Base Pad For Glock 19/23 OEM 9/40 Magazines

$24.99 - $32.99

Blem-Ventory Base Pad For Glock 19/23 OEM 9/40 Magazines

$24.99 - $32.99

* ALL SALES ARE FINAL WITH BLEM-VENTORY MAGWELLS *

* EVERY blemished base pad will have a small lightning bolt lasered on it to indicate that it is from BLEM-VENTORY. *

*Please contact us for any questions about the aesthetic condition, or leave an order comment with your preference. We will do our best to accommodate any requests*

blemished-products.png

The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw.

*Not for sale to California and Washington residents. A courtesy email will be sent to CA/WA residents who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued unless the purchaser is active Law Enforcement. CA/WA civilians can only purchase base pads listed on the following link - https://tarantacticalinnovations.com/magazine-extensions/california-compliant/

*Remove the metal insert at the bottom before installation*

*This product will ONLY work on Glock 19 and Glock 23 firearms! This product will ONLY work on the Compact 9mm and .40 cal Glock OEM magazines!*

*Will not function with early generation Glock mags that have u-notch cut feed lips*

*WILL NOT WORK WITH 10 ROUND MAGAZINES, ASIDE FROM OUR +0 BASE PADS*

GLOCK 19/23 +2/3

*Remove the OEM polymer insert at the bottom before installation*

*Will not function with early generation Glock mags that have u-notch cut feed lips*

*WILL NOT WORK WITH 10 ROUND MAGAZINES!*

TTI Firepower Base Pad Kit for GLOCK.

  • Overall weight 0.8oz.
  • Length, 1/2 inch.
  • Patented proven push pin design.
  • Super easy to attach and detach from the magazine.
  • No specialty tools or devices required to disassemble.
  • One piece design, no extra parts to possibly lose during disassembly.
  • Fits the USPSA 140mm gauge.
  • Works only on high-cap double stacked GLOCK OEM magazines.
  • Holds 15+1 rounds of 40S&W.
  • Holds 18+1 rounds of 9mm.
  • The added weight helps the magazine drop free easily for faster reloads.
  • CNC machined from billet aluminum.
  • Hard Anodized.
  • Made in the USA.
  • Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler.

The Taran Tactical Innovations GLOCK +2/3 base pad works on GLOCK models 19/23. This base pad will add 3 extra rounds in 9mm and 2 extra rounds in 40 Caliber to the magazine. This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

GLOCK 19/23 +4/5

Not for sale to California residents. A courtesy email will be sent to CA residents who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued. CA residence can only purchase +0 base pads or GLOCK 43 and GLOCK 42 base pads. The 43 and 42 base pads do not take the mag capacity past ten rounds.

*Remove the metal insert at the bottom before installation*

*Will not function with early generation Glock mags that have u-notch cut feed lips*

*WILL NOT WORK WITH 10 ROUND MAGAZINES!*

TTI Firepower Base Pad Kit for GLOCK.

  • The +4/5 Base Pad comes with a +10% stronger spring.
  • Overall weight 1.5oz.
  • Length, 1 1/2 inch front side, 3/4 inch on back side.
  • Patented proven push pin design.
  • Super easy to attach and detach from the magazine.
  • No specialty tools or devices required to disassemble.
  • One piece design, no extra parts to possibly lose during disassembly.
  • Fits the USPSA 140mm gauge.
  • Ideal for full size magazines.
  • Holds 18+1 rounds of 40S&W.
  • Holds 20+1 rounds of 9mm.
  • The added weight helps the magazine drop free easily for faster reloads.
  • CNC machined from billet aluminum.
  • Hard Anodized.
  • Made in the USA.
  • Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler.

The Taran Tactical Innovations GLOCK +4/5 base pad works on GLOCK models 19/23. This base pad will add 5 extra rounds in 9mm and 4 extra rounds in 40 Caliber to the magazine. This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

DISCLAIMER: This product is not manufactured, authorized, endorsed, or warranted by GLOCK. GLOCK does not warrant or represent that this product is compatible with GLOCK pistols.

  • Save money, Buy blem
    5

    Posted by Manyo on May 18th 2024

    Great product. Just as good as the non blemished basepads but you save money. I buy all the blem products I can because I'm just going to drop everything anyway.

  • Blem-Ventory Base Pad For Glock 19/23 OEM 9/40 Magazines
    5

    Posted by Brendan T. on Dec 4th 2023

    Can't tell these are blems. Form, function and finish all top-notch.

  • Never got A Taran product that didn’t do what is supposed to.
    5

    Posted by Mike on Oct 1st 2023

    Blemished parts make great sense as magazines are the most often dropped part of a firearms package. The products are easy to install but I have been a hobby gunsmith since 1998. I own 6 Glocks. I install all my own parts. No shame in deferring to a professional gunsmith if you are unsure about your skill level. Mike