Categories

 Loading... Please wait...

Categories

Always Enjoy

Free Shipping

On Orders Of $200
Glock 19/23 Base Pad
+4/5 Flat Black
+4/5 Black
+4/5 Blue
+4/5 Titanium Purple
+4/5 Titanium Gray
+4/5 Titanium Blue
+2/3 Flat Black
+2/3 Titanium Gray
+2/3 Red
+2/3 Black
+2/3 Titanium Blue
+2/3 Coyote Bronze
+2/3 Blue
+2/3 Titanium Purple
+2/3 OD Green
+4/5 OD Green
+4/5  Black
+4/5 Flat Black
+4/5 Red
+4/5 Coyote Bronze
+4/5 OD Green
+4/5 Titanium Blue
+4/5 Titanium Purple
+4/5 Blue
+4/5 Titanium Gray

Base Pad For Glock 19/23 OEM 9/40 Magazines

$34.99
Quantity:

Always Enjoy Free Shipping On Orders Of $200

Product Description

The pin set screws are set with Loctite® at the specific tension we recommend, and will generally never need an adjustment. Tightening the base pad screw is not recommended and may be difficult because the screw is set with Loctite®; trying to force the set screw to turn could result in stripping the screw. We do not warranty base pads for stripped heads on set screws or pins lost in result of tampering with the set screw.

*Remove the metal insert at the bottom before installation*

*This product will ONLY work on Glock 19 and Glock 23 firearms! This product will ONLY work on the Compact 9mm and .40 cal Glock OEM magazines!*

*Will not function with early generation Glock mags that have u-notch cut feed lips*

*WILL NOT WORK WITH 10 ROUND MAGAZINES, ASIDE FROM OUR +0 BASE PADS*

To view our +0 Base Pads, please follow this link - https://tarantacticalinnovations.com/0-base-pad-for-glock-oem-magazines/

GLOCK 19/23 +2/3

Not for sale to California residents. A courtesy email will be sent to CA residents who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued. CA residence can only purchase +0 base pads or GLOCK 43 and GLOCK 42 base pads. The 43 and 42 base pads do not take the mag capacity past ten rounds.

*Remove the OEM polymer insert at the bottom before installation*

*Will not function with early generation Glock mags that have u-notch cut feed lips* 

*WILL NOT WORK WITH 10 ROUND MAGAZINES!*

TTI Firepower Base Pad Kit for GLOCK.

- Will work on all full size double stacked GLOCKs.

- Overall weight 0.8oz.

- Length, 1/2 inch.

- Patented proven push pin design.

- Super easy to attach and detach from the magazine.

- No specialty tools or devices required to disassemble.

- One piece design, no extra parts to possibly lose during disassembly.

- Fits the USPSA 140mm gauge.

- Works only on high-cap double stacked GLOCK OEM magazines.

- Holds 15+1 rounds of 40S&W.

- Holds 18+1 rounds of 9mm.

- The added weight helps the magazine drop free easily for faster reloads.

- CNC machined from billet aluminum.

- Hard Anodized.

- Made in the USA.

- Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler.

The Taran Tactical Innovations GLOCK +2/3 base pad works on GLOCK models 19/23. This base pad will add 3 extra rounds in 9mm and 2 extra rounds in 40 Caliber to the magazine. This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This TTI GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad onto the magazine and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

GLOCK 19/23 +4/5

Not for sale to California residents. A courtesy email will be sent to CA residents who place an order for a base pad that has the capability of taking a magazine past ten rounds. Ultimately a refund will be issued. CA residence can only purchase +0 base pads or GLOCK 43 and GLOCK 42 base pads. The 43 and 42 base pads do not take the mag capacity past ten rounds.

*Remove the metal insert at the bottom before installation* 

*Will not function with early generation Glock mags that have u-notch cut feed lips* 

*WILL NOT WORK WITH 10 ROUND MAGAZINES!*

TTI Firepower Base Pad Kit for GLOCK.

- The +4/5 Base Pad comes with a +10% stronger spring.

- Overall weight 1.5oz.

- Length, 1 1/2 inch front side, 3/4 inch on back side.

- Will work on all full size double stacked GLOCKs.

- Patented proven push pin design.

- Super easy to attach and detach from the magazine.

- No specialty tools or devices required to disassemble.

- One piece design, no extra parts to possibly lose during disassembly.

- Fits the USPSA 140mm gauge.

- Ideal for full size magazines.

- Holds 18+1 rounds of 40S&W.

- Holds 20+1 rounds of 9mm.

- The added weight helps the magazine drop free easily for faster reloads.

- CNC machined from billet aluminum.

- Hard Anodized.

- Made in the USA.

- Used and endorsed by World and National Champions Bob Vogel, the GLOCK Shooting Team, Randi Rogers, Allie Barrett, and of course Taran Butler.

The Taran Tactical Innovations GLOCK +4/5 base pad works on GLOCK models 19/23. This base pad will add 5 extra rounds in 9mm and 4 extra rounds in 40 Caliber to the magazine. This base pad does add a little extra weight to the magazine which helps the empty mag drop free easier for faster reloads. This GLOCK base pad, just like all of our base pads, is designed to give you the edge over your adversaries. We use our patented push pin design to lock the base pad to the magazine, which makes for easy field stripping and cleaning your magazines between stages. Just push down the pin, slide the base pad on and push the pin up to lock the base pad onto the magazine. Our one piece design is great because there are no extra parts or tools needed to attach the base pad to your magazine. The base pad itself is machined out of billet aluminum and is hard anodized to ensure durable long lasting color. All machining and manufacturing is done in the USA.

Product Reviews

Write Review

Showing reviews 1-10 of 244 | Next

  1. Great Quality, Fast Shipping

    Posted by AJ on Oct 25th 2019

    The base plates for my G19 were shipped immediately and delivered faster than expected. I am very pleased with the quality of the product and its overall appearance.
    After this initial purchase, I had inquired about another product that interested me. The customer service/communication I received was absolutely top notch. Even though I ended up not purchasing the in stock item, TTI staff continued to help find what I was looking for. While the base plates were my first purchase from TTI, I will certainly give them more business in the near future.

  2. Love the mag extensions

    Posted by Gordon Hicks on Oct 9th 2019

    Just got a kel-tec with a glock 17 pistol grip. I have used these extensions on other mags and as always they are top notch.

  3. GREAT extension for the quality and quantity!!

    Posted by Joshua Stinson on Oct 7th 2019

    Been training for two months for competition and I recently decided to upgrade to a Taran Tactical +5 extension. The quality of the material was phenomenal. At first, I did have a couple feeding problems using a Glock OEM magazine the first ~40 rounds, but since then I had broken in the spring enough that I haven’t had a problem since. Once or twice in the beginning after making a fast reload with the slide back on my 34, after loading in the new mag the slide racked forward without my assistance. Haven’t had that problem since, but I’m keeping my eye on it. Allows for easier, faster reloads and fits perfect with my Agency Arms magwell. Would definitely recommend for a friend.

  4. Great but be careful with the screws!

    Posted by Drake on Sep 24th 2019

    Over all a great purchase and I am very happy with the +5 and +3 that I purchased but the +3 bolt would not turn when I went to tighten it eventually I got it to go by stripping it out now its permanent!!

    TTI Rep: Per our product description and on our FAQ page, we set the screw with Lock-tite, it is not intended to be tightened. Our basepads are a tool-less design, just push the pin down, slide it onto the magazine and push the pin up. The pin is set with a little bit of tension so the screw will not fall out. If the basepad pin falls out contact us and we will get you up and running. Trying to tighten the screw will result in stripping the screw and voiding your warranty.

  5. Solid

    Posted by Rich on Sep 16th 2019

    Fits great on my 19 gen 5 mag. Went to range immediately and tested. Passed with flying colors so it is now on my EDC.

  6. Base Pad

    Posted by Randy F Monson on Sep 2nd 2019

    It was harder getting the old Glock base pad off than putting the TTI one on.

  7. Not for LE duty/range use

    Posted by Robert Bracco on Aug 30th 2019

    These base plates look great but the function is not really there. They routinely pop off causing a confetti of live rounds when a magazine is dropped on the ground. I will be switching back to my stock base plates.

    TTI Rep: I have taken a look at your order and it looks like you have placed orders for Standard sized Glocks. The basepad that you would want to use for the Glock 19 is specifically made for a Glock 19/23. Please contact us and we will be more then happy to swap them out for you. LT

  8. BEST BASEPAD

    Posted by Eduardo J. Cortés on Aug 28th 2019

    Looks great, +5 capacity is a great addition to my Glock 17, no failures yet.

  9. Great product with great service

    Posted by Austin V. on Aug 26th 2019

    Awesome product both looking and functionally. Fast shipping with great service. Couldn’t be happier with my purchase. Will definitely be placing more orders with TTI.

  10. Works great and as expected, also looks nice

    Posted by Jeff on Aug 21st 2019

    purchased the 0 and +2/3 base pads in Coyote Bronze for my Glock 19 Gen 5 MOS. Shipping was quick. Ordering process was smooth. And product was as expected. Fired around 200 rounds through each magazine with no errors or issues. The best part is the pin so you can take the mag apart to clean as needed easily. Great for cleaning during competitions if you need to.. Will be purchasing some +5/6 base pads for my Glock 34 that i will be using in Carry Optics....

Showing reviews 1-10 of 244 | Next

Find Similar Products by Category