On Orders Of $200
Designed to be used in conjunction with our Ultimate Reduced-Power Buffer/Hammer Spring, and Trigger Guard C-Clip.
*Taran Tactical recommends that you go to a certified gunsmith or Glock armorer for installation*
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Posted by Drundel on Feb 12th 2018
Good upgrade for the SBE1/2 for hunting. I put these in my SBE2 for hunting and I am already shooting better. I have a Shotkam on my gun and can see me pulling the gun to the left on days when I am wearing a heavy jacket.
There are some good videos in YouTube showing how to install.
Reduced Stock trigger pull by 3#
Posted by Matt on Nov 14th 2017
My original trigger pull on a stock Benelli M4 was average 9 5/8 # using 5 measurements on a timmney trigger weight gauge. I knew it was a tough pull, but dang! So I installed just the trigger spring since I need a set of retaining ring pliers to install the hammer spring. I used a set of tweezers and a small punch to do the install. It was easy. This was my first experience installing anything on a gun. After the install I was reading an average of 6 1/4 pound. I will install the hammer spring when the pliers come in.
Huge reduction in trigger pull force
Posted by Unknown on Oct 12th 2017
Installed both.....Reduced-Power Hammer Spring and Trigger Spring in a Versa Max.
Using a Wheeler Engineering Trigger Pull Scale.......
Stock springs - 7.6 - 8.0 lb.
TTI Springs - 3.5 - 3.8 lb.
Instantly made me a better shooter.
No misfires using Fiocchi low recoil slugs.
An absolute must have.
Smooth as a baby's bottom
Posted by Aaron on Apr 10th 2017
Excellent services by TTI staff getting my product out to me so quickly! So far, post test with Lyman Digital Trigger pull showed a WHOOPING 4 lbs and 8 oz from stock pre test of 6 lb 15 oz on my Stoeger M3K! Look forward for smooth transition from targets to targets. Thanks TTI!!
Cut trigger weight in half
Posted by Unknown on Mar 28th 2017
In addition to the lifter spring, this spring cut my trigger pull weight in half. No need for a $300 trigger assembly.
Posted by Unknown on Feb 7th 2017
Makes trigger much lighter and crisper. Must buy upgrade.
Very good product
Posted by Unknown on Jan 20th 2017
Spring made a very good trigger.
Must have for Benelli Auto-Loaders!
Posted by Michael on Aug 30th 2016
This is just about the best modification you can do to the Benelli! Super crisp trigger performance and the perfect amount of trigger weight. It makes breaking off second and third shots in the goose blind much easier and it is amazing for fast running competitive shooting! Must buy if you love your Benelli!
Best upgrade dollar for dollar
Posted by Jared on Jun 6th 2016
I installed this along with the reduced power hammer spring in my M3K. I went from a 7lb pull to 4.2lbs. Highly recommend this especially for slug shots at distance
Excellent product! Probably the best and easiest way to lighten the trigger pull!
Posted by Taylor Jones on May 10th 2016
I installed this spring in my M2 and SBE2. The triggers are much better than factory! I great upgrade!