Benelli Ultimate Reduced-Power Hammer Spring

SKU:
BNLI-RPS02
$7.99
(25 reviews)
Current Stock:
Adding to cart… The item has been added

The TTI Benelli Ultimate Reduced-Power Hammer Spring drops in to reduce the trigger-pull weight of your Benelli M1 M2 M4 Beretta Shotgun and still get detonation with all factory ammunition.

*Taran Tactical recommends that you go to a certified gunsmith or Glock armorer for installation*

WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov

Reviews

  • 5
    Hammer spring

    Posted by Alan Sunday on Sep 7th 2021

    I used this in a girsan mc313 tactical. I couldn’t run lighter loads with this gun before changing this spring. The original spring was much stiffer so I needed a lot of force to reset the hammer. After changing this spring it lowered the reset by a half pound and now I can run lighter loads.

  • 5
    Hammer spring

    Posted by Alan Sunday on Sep 7th 2021

    I used this in a girsan mc313 tactical. I couldn’t run lighter loads with this gun before changing this spring. The original spring was much stiffer so I needed a lot of force to reset the hammer. After changing this spring it lowered the reset by a half pound and now I can run lighter loads.

  • 5
    worked as advertised

    Posted by Brad Burton on Jun 10th 2021

    It did as advertised and lighten the trigger pull on my M1.

  • 5
    Hammer spring

    Posted by Aaron on May 5th 2021

    Put this hammer spring in a Stoeger M3K and it cut the trigger pull down to 4.5-5 lbs from 8.5 lbs. definitely worth the money.

  • 5
    Noticeable improvement

    Posted by Nate on Jul 10th 2020

    Can’t go wrong with this addition. Added it to my 20 ga Montefeltro for turkey hunting. Cycles fast and works with all the loads I’ve used. Cheapest upgrade I’ve done.

  • 5
    A must for Benellis

    Posted by Brad on Jul 8th 2020

    This is my 3rd set, this time for my new Ethos BEST that will be my new dove and duck gun. The trigger on the Ethos is a little different on the SBE/SBE2 and you need to remove both pins, but still pretty easy.

  • 5
    Greatly Improves Stoeger M3K trigger

    Posted by Dave Davis on May 2nd 2020

    Trigger and hammer spring made a big difference in my Stoeger M3K. Cycles much faster and the trigger is noticeably lighter. Perfect fit and quick install. Double tapping with a shotgun is something I never thought I’d achieve with a cheaper shotgun.

  • 4
    Short and smooth

    Posted by Unknown on Dec 10th 2019

    These springs shorten the trigger and keep it smooth and crisp.

  • 5
    TTI Trigger

    Posted by John P Coleman on Dec 2nd 2019

    Wonderful addition to my Benelli M2 Tactical