On Orders Of $200
The TTI Benelli Ultimate Reduced-Power Hammer Spring drops in to reduce the trigger-pull weight of your Benelli M1 M2 M4 Beretta Shotgun and still get detonation with all factory ammunition.
*Taran Tactical recommends that you go to a certified gunsmith or Glock armorer for installation*
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Posted by firstname.lastname@example.org on Apr 1st 2019
Reduced my trigger pull to 3.25 pounds
Posted by Steve on Sep 9th 2018
The combination of the reduced power trigger and hammer springs worked very well. My M2 had a trigger pull that was creepy and about 5.2 lbs. After installation of the springs the trigger still has some creep, but it is smoother. It also is a consistent 3.2 lbs and produced no failures in the 100+ rounds I've fired since the upgrade. Easy installation...inexpensive and effective. Doesn't get better than that.
Posted by Greg on Mar 1st 2018
Great replacement springs. Really makes a difference in the action of the shotgun.
Posted by Drundel on Feb 12th 2018
Good upgrade for the SBE1/2 for hunting. I put these in my SBE2 for hunting and I am already shooting better. I have a Shotkam on my gun and can see me pulling the gun to the left on days when I am wearing a heavy jacket.
There are some good videos in YouTube showing how to install.
Huge reduction in trigger pull force
Posted by Unknown on Oct 12th 2017
Installed both.....Reduced-Power Hammer Spring and Trigger Spring in a Versa Max.
Using a Wheeler Engineering Trigger Pull Scale.......
Stock springs - 7.6 - 8.0 lb.
TTI Springs - 3.5 - 3.8 lb.
Instantly made me a better shooter.
No misfires using Fiocchi low recoil slugs.
An absolute must have.
Making Triggers Great Again
Posted by Andrew Boldt on Apr 24th 2017
One of the easiest and best upgrades for your Benelli is the reduced power trigger and hammer spring from TTI. I have installed them in three different shotguns with zero functioning issues. This is a must if you want to improve your slug shooting!
Posted by David on Mar 30th 2017
Installed in my Stoeger M3500, much needed upgrade with trigger spring. Smoothed out and lightened trigger pull. Stock trigger was horrible, this was a necessary upgrade for anyone wanting a smooth, lighter, consistent trigger.
Makes a sub 4lb trigger
Posted by Unknown on Mar 30th 2017
This with the trigger spring make a 7 lb trigger into a 3.5-4 lb trigger. Have installed these in m1s90, m4, and ultra light all work great
Posted by Unknown on Feb 7th 2017
Easy enough to install, greatly improves trigger feel.
Best upgrade for stoeger m3k for money
Posted by tcodyw88 on Sep 6th 2016
Great product. My favorite upgrade for the stoeger m3k make sure you order a few extras!