Benelli Ultimate Reduced-Power Hammer Spring
Excellent product, reduced the trigger pull on my M2 to between 3 & 3.5 lbs. from an original 4.75 lbs. with the addition of the Benelli Ultimate Reduced-Power trigger Spring.
The TTI Benelli Ultimate Reduced-Power Hammer Spring drops in to reduce the trigger-pull weight of your Benelli M1 M2 M4 Beretta Shotgun and still get detonation with all factory ammunition.
*Taran Tactical recommends that you go to a certified gunsmith or Glock armorer for installation*
WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
Excellent product, reduced the trigger pull on my M2 to between 3 & 3.5 lbs. from an original 4.75 lbs. with the addition of the Benelli Ultimate Reduced-Power trigger Spring.
I used this in a girsan mc313 tactical. I couldn’t run lighter loads with this gun before changing this spring. The original spring was much stiffer so I needed a lot of force to reset the hammer. After changing this spring it lowered the reset by a half pound and now I can run lighter loads.
I used this in a girsan mc313 tactical. I couldn’t run lighter loads with this gun before changing this spring. The original spring was much stiffer so I needed a lot of force to reset the hammer. After changing this spring it lowered the reset by a half pound and now I can run lighter loads.
